The keypads were flashing, autofill didn't work and only the continuous brew button would work. Here's the detailed story ending: I was stuck at this point. Bad news: It took some doing to get there. Good news: The machine is fixed and happily serving 8-12 people as a community machine at my place of work.įrom the day that I got it going, it has run flawlessly and not skipped a beat. Since I saw some action on this thread, I feel the need to close the loop. I guess it is cheaper to make one motherboard for all the machines, even if it will have too many parts. And I can plug the cable to the control box into no matter which one, handy if one if the circuits fails I guess.įuturmat espresso machines designed and made by quality espresso in Barcelona. J -edit- if your other rotary pump doesn't work you could always run both machines off the same pump (provided you get to keep them both) also about the circuits for one, two and three groups on the motherboard, the automatic circuit for my astoria (1 group ) also has three connections for the groups. A super automatic that my parents have uses this system to check if there is water in the reservoir. The sight glass floater probably has a magnet in it that trips the sensor. The strange 'diode' with the loose wires near the sight glass is probably a magnetic sensor, like the ones that are used for the door contact switches in home security alarms.
0 Comments
Leave a Reply. |